I recently had the chance to A-B test a Mamo Motorsports LT4 V2 ported throttle body. This is Tony’s latest porting profile combined with a “shaft-mod” which reduces the profile of the shaft and associated hardware… allowing more airflow at […]
Blog
Gain 40hp in one easy step!
TLDR: A massive change in rotational mass resulted in ~40whp drop in horsepower measured at the tires of a Jeep Gladiator. With the stock 32” tire and rim combo I measured 352whp & 346wtq at 7.3psi. The sneakers were swapped […]
2013 Camaro ZL1 – Stage 2
After a long wait I completed “Stage 2″ of my build which includes Kooks long tube headers (ceramic coated with 2″ primaries), Kooks 3″ to 2.5″ off-road pipes, Injector Dynamics 850cc injectors, Kenne Bell Boost-A-Pump, Metco 10” lower pulley, AFCO […]
2013 Camaro ZL1 – Stage 1
I purchased a 2013 ZL1 M6 in June ’15 and performed some interesting mods and tuning during my ownership. The first round of data was collected throughout the Fall of ’15. I’ll provide some thoughts on the mods and results below. Unless noted, each […]